威尼斯人官网

Popular keywords on this site: soldering machine , automatic soldering machine , motor soldering machine , PCB soldering machine , LED soldering machine , USB soldering machine , visual soldering machine , online soldering machine ,

contact details

Shenzhen Special Automation Co., Ltd.

Address: Gongming Street, Guangming New District, Shenzhen

2nd Floor, Area A, D Building, Guancheng Low-carbon Industrial Park

Contact: Miss Liu

Mobile (WeChat): 13316831238

2355635104@qq.com Email: 2355635104@qq.com

Phone: 0755-27271317

Fax: 0755-27276228


您的位置: 首页 - 公司动态 - 常见问题 Routine maintenance and repair of automatic soldering machineYour position: 威尼斯人官网 - Company News - FAQ

Daily maintenance and repair of automatic soldering machine

Release time: 2017.02.18News source: Shenzhen Tedder Automation Co., Ltd. Views:
The performance of any device will decrease with its service life. If it is not maintained and repaired from time to time, a large number of problems will inevitably occur during production, which will not only seriously affect production efficiency, but also increase the workload. Let's take a look at the daily maintenance and regular maintenance of automatic soldering machines.

Routine maintenance:
It is required to clean the soldering machine after working every day; use a clean cloth to wipe out debris, dust, etc. on the automatic soldering machine. Wipe the remaining tin wire and rosin on the tip of the soldering iron with a sponge, turn off the power, and add tin to the soldering iron head when the temperature decreases. Clean the solder dross and solder head in the cleaning device.

Regular maintenance:
The gears of the soldering device of the automatic soldering machine need to be regularly added with lubricating oil, about once every two months. If the gears or blades are worn, they need to be replaced in time. Pay attention to whether the temperature on the temperature control display is abnormal. Whether the thermocouple is worn, you need to replace it; regularly check whether the screws of the fuselage are slipped or loose.

Precautions:
When the automatic soldering machine is stopped, the plug must be unplugged, so as not to damage the machine for too long;
Do not hold the automatic soldering machine by force.
For those who do not know the automatic soldering machine, do not disassemble or replace the machine without permission.
This article is divided into 1 pages
share to:
Previous: Cleaning method of automatic soldering machine
Next: The difference between a special automatic soldering machine