Shenzhen Special Automation Co., Ltd.
Address: Gongming Street, Guangming New District, Shenzhen
2nd Floor, Area A, D Building, Guancheng Low-carbon Industrial Park
Contact: Miss Liu
Mobile (WeChat): 13316831238
firstname.lastname@example.org Email: email@example.com
Many customers and friends ask us why the soldering iron head cannot be pulled out after using the special automatic soldering machine. In this case, it is often caused by improper maintenance of the automatic soldering machine. After the automatic soldering machine is finished working, the above flux is not cleaned up in time.
Everyone knows that the solder wire used for soldering generally contains solder resist. The solder wire will generate fumes under high temperature melting. This fumes are actually tiny particles that are generated by the boiling of the flux inside the solder wire. This tiny particle easily penetrates the part where the soldering pen and the iron tip are combined. Over time, the soldering iron tip will stick to the soldering pen over time. When the temperature cools down, the flux will solidify inside. The soldering iron tip is sticky, and the soldering iron tip will not be easy to remove.
If we really encounter this situation, there are two ways to solve it:
1. Soak the iron tip in alcohol for a period of time using alcohol soaking. The alcohol can dissolve the solder solids, so that the soldering iron tip can be easily removed.
2. Raise the temperature of the soldering iron tip to achieve the same effect of dissolving the flux. Then cut off the power supply and remove the soldering iron tip from the soldering pen with a tool. Remember to use tools instead of touching the soldering iron tip with your hands to avoid burns.
Of course, if we can use the automatic soldering machine to clean up the flux on the soldering iron head with alcohol in time, we can save these efforts, which is also beneficial to the maintenance of the automatic soldering machine.
| Previous: Shenzhen Tedder Automation Co., Ltd. 2017 Spring Festival Holiday Notice |
Next: Why does the automatic soldering machine replace manual soldering?