威尼斯人官网

Popular keywords on this site: soldering machine , automatic soldering machine , motor soldering machine , PCB soldering machine , LED soldering machine , USB soldering machine , visual soldering machine , online soldering machine

contact details

Shenzhen Special Automation Co., Ltd.

Address: Gongming Street, Guangming New District, Shenzhen

2nd Floor, Area A, D Building, Guancheng Low-carbon Industrial Park

Contact: Miss Liu

Mobile (WeChat): 13316831238

2355635104@qq.com Email: 2355635104@qq.com

Phone: 0755-27271317

Fax: 0755-27276228


您的位置: 首页 - 公司动态 - 常见问题 Automatic soldering machine system debuggingYour position: 威尼斯人官网 - Company News - FAQ

Automatic soldering machine system debugging

Release time: 2017.01.06 News source: Shenzhen Tede Automation Co., Ltd. Browse times:

First, place and fix a component to be soldered on the fixture, start the PLC to start the photoelectric sensor, and after detecting that the component to be soldered is placed correctly, press the system start button. After the safety light curtain receives a signal from the operator's hand to leave the danger zone, the fixture will send the device to be soldered to the set position of the electric cylinder. After soldering out, the solder head will drop for the first soldering. After repeated debugging, the final soldering time was about 5s. You can set the soldering time through the parameter setting interface. After an interval of 2 s, repeat again. After the soldering of solder joint 1 is completed, the welding head returns to its original position.

Then the clamp will go to the position set by the electric cylinder. At this time, the welding head is lowered again, and the tin pipe is tin again, and the soldering work for the second spot to be soldered is performed. The tin slag cleaning cylinder will reach the extension position, collect the tin slag generated on the way under the welding head, and then suck the tin slag collected in the tin slag box through the gas pipe. The entire soldering process at the cleaning site can be monitored by the monitoring interface.

Based on the comprehensive use of PLC programming technology and Wince configuration technology combined with electric cylinder. sensor. The hardware components such as soldering components have completed the design of the automatic soldering machine control system and realized the complete automation of the soldering process. The practical application shows that the system has the advantages of simple structure, easy maintenance and high real-time performance, can effectively improve production efficiency, and has certain promotion value and Application prospects.
Vision Soldering Machine

This article is divided into 1 pages
share to:
Previous: Automatic soldering machine system
Next: The concept of soldering machine
related articles: